If you have never had turf put in, the process can feel like a black box. In fact, it follows a steady order that most crews repeat on every job. Here is how a typical install day plays out in a Wheat Ridge yard, step by step, so nothing catches you off guard.
What happens on the day artificial turf is installed?
On artificial turf installation day, the crew marks the area, pulls out grass and soil, caps sprinklers, builds and packs a crushed gravel base, rolls out turf with the blades all leaning one way, joins the seams, fastens the edges and brushes in infill. Small yards can wrap up in a day, while bigger ones take a few. Clearing the yard, unlocking gates and handling pets and parking ahead of time keeps the day on track.
First Morning: Marking and Digging
The crew shows up, walks the yard with you and outlines the turf area with paint or flags. They find the sprinkler heads and lines, and buried utilities should already be marked by then. Then the digging begins. A sod cutter slices up the grass, and the crew takes out a few inches of soil.
The old sod and soil get loaded into a trailer or dump truck. Sprinklers inside the turf area are capped, and the crew checks the grade so the finished turf will line up with the patio and sidewalks.
Laying and Packing the Base
The base comes next. Crushed gravel is wheeled in and spread over the dug out area. The crew rakes it smooth and builds in a slight slope for drainage, then runs a plate compactor over it. They may repeat this in layers until the base is solid and even.
Building the base properly takes time, and it is not a step to hurry. A solid, well graded base keeps the turf flat and lets water drain through. Some crews lay a weed barrier at this point, depending on the yard and the product.
Laying the Turf and Finishing Up
The turf rolls are spread over the base with every blade leaning the same way, so the color looks even. Where rolls meet, the crew matches up the edges and bonds them with seam tape and glue. The turf is cut to fit along the borders and fastened around the outside.
Last, infill is spread over the top and worked down into the fibers with a power broom. The broom also lifts the blades and hides the seams. The crew cleans up, hauls away leftovers and walks through the finished yard with you.
Once the Crew Heads Home
Give the infill a few days to settle in and brush any spots that look flat. Keep heavy furniture off new seams for a little while. If you are thinking about an install for your own yard, an independent local turf provider who works in Wheat Ridge can help, and we can pass your request along.
